Click or drag to resize
Accord.NET (logo)

Compressor Fields

The Compressor type exposes the following members.

Fields
  NameDescription
Protected field_nativePointer
The native pointer
(Inherited from CppObject.)
Public fieldStatic memberAttackDefault
Default time before compression reaches its full value, in decibels (dB). The default value is 10 ms.
Public fieldStatic memberAttackMax
Maximum time before compression reaches its full value, in decibels (dB).
Public fieldStatic memberAttackMin
Minimum time before compression reaches its full value, in decibels (dB).
Public fieldStatic memberGainDefault
Default output gain of signal after compression, in decibels (dB). The default value is 0 dB.
Public fieldStatic memberGainMax
Maximum output gain of signal after compression, in decibels (dB).
Public fieldStatic memberGainMin
Minimum output gain of signal after compression, in decibels (dB).
Public fieldStatic memberPreDelayDefault
Default time after threshold is reached before attack phase is started, in milliseconds. The default value is 4 ms.
Public fieldStatic memberPreDelayMax
Maximum time after threshold is reached before attack phase is started, in milliseconds.
Public fieldStatic memberPreDelayMin
Minimum time after threshold is reached before attack phase is started, in milliseconds.
Public fieldStatic memberRatioDefault
Default compression ratio. The default value is 3, which means 3:1 compression.
Public fieldStatic memberRatioMax
Maximum compression ratio.
Public fieldStatic memberRatioMin
Minimum compression ratio.
Public fieldStatic memberReleaseDefault
Default speed at which compression is stopped after input drops below Threshold, in milliseconds. The default value is 200 ms.
Public fieldStatic memberReleaseMax
Maximum speed at which compression is stopped after input drops below Threshold, in milliseconds.
Public fieldStatic memberReleaseMin
Minimum speed at which compression is stopped after input drops below Threshold, in milliseconds.
Public fieldStatic memberThresholdDefault
Default point at which compression begins, in decibels, in decibels (dB). The default value is -20 dB.
Public fieldStatic memberThresholdMax
Maximum point at which compression begins, in decibels, in decibels (dB).
Public fieldStatic memberThresholdMin
Minimum point at which compression begins, in decibels, in decibels (dB).
Top
See Also